3001B Multi-Specialty Operating Table | Stainless Steel X-ray Translucent Surgical Table
Key words：
Category：
Hydraulic Surgical Bed
DOWN LOAD BROCHURE：
- Parameters
- Features
- Quality
- Warranty
-
- Commodity name: 3001B Multi-Specialty Operating Table | Stainless Steel X-ray Translucent Surgical Table
- 产品编号: 3001B
►1.PRODUCT DESCRIPTION
Manual hydraulic lifting
Manual hydraulic lifting system provides stable tabletop elevation for routine general surgery without electrical dependence.
Gas spring back plate
Back plate adjustment is controlled by gas spring, helping achieve smooth and convenient positioning during operation.
Gas spring leg plate
Leg plate movement is controlled by gas spring for flexible angle adjustment and easier patient positioning.
T-shaped ergonomic base
The T-shaped base follows ergonomic principles and leaves more working space for doctors around the operating table.
►2.TECHNICAL PARAMETER
Model 3001B Length ≥1980 mm Width 500 mm Tabletop lowest height ≤750 mm Elevation range 300 mm Reverse Trendelenburg ≥30° Trendelenburg ≥20° Lateral tilt (left and right) ≥20° Head plate (up/down) ≥45° / ≥90° Back plate (up/down) ≥75° / ≥30° Leg plate (up/down/outward) ≥15° / ≥90° / ≥90° Kidney bridge elevation ≥120 mm ►3.STANDARD CONFIGURATION
- Manual hydraulic operating table main unit.
- Head plate, back plate and leg plate sections.
- Mattress.
- T-shaped base and mechanical control structure.
►4.OPTIONAL CONFIGURATION, ACCESSORIES AND SERVICE
- Please consult for accessory configuration according to different procedure requirements.
- Remote technical guidance for installation and basic operation.
- Spare parts supply and after-sales service support.
►5.ADVANTAGE
Manual hydraulic operation:
The brochure describes an all-mechanical operating table with hydraulic lifting, helping provide stable elevation in daily use.
This structure is practical for routine general surgery where straightforward operation and convenient maintenance are preferred.
Gas spring assisted adjustment:
The back plate and leg plate are controlled by gas spring, allowing smoother angle adjustment during patient positioning.
This helps staff complete setup more conveniently for different general surgery requirements.
Reliable mechanical motion control:
Worm gear drive is used to control key table movements, helping provide dependable manual mechanical operation.
Trendelenburg, reverse Trendelenburg and lateral tilt all provide practical positioning ranges for routine procedures.
Ergonomic T-shaped base:
The T-shaped base follows ergonomic principles and leaves enough free space for doctors around the operating table.
This improves accessibility around the table and makes the product suitable for general surgery environments.
Positioning flexibility for general surgery:
Head plate, back plate, leg plate and kidney bridge movements help the table adapt to different positioning requirements.
The parameter range shown in the brochure supports routine general surgery applications with practical positioning flexibility.
Technical Support Services:
1. Online Consultation Support: We provide online consultation for product use, operating questions and routine troubleshooting.
2. Installation Guidance: Remote guidance is available for setup and basic operation training.
3. Spare Parts and Maintenance Support: Spare parts supply and follow-up service can be arranged according to actual needs.
-
Waterproof, Hygienic Upholstery
Medical-grade waterproof leather with seamless design resists mildew, bacteria and alcohol-based disinfectants—easy to wipe and maintain OR hygiene.
-
WHY CHOOSE
MT MEDICAL
+500 employees
+100000 m² of production facilities
29 product categories
698 series products
+1000 organizations
in +206 countries attended
OUR GLOBAL
PARTNERS
PROFESSIONAL
TEAMS
Design Research Manufacturing Maintenance Service 
RELIABLE
PACKING
OUR
CERTIFICATES
We focus on constant innovation. We work on the continuous development and implementation of new standards for product quality and the efficiency of our service. As a result, we accumulate more than 2,000 registered technological patents and our products were approved by quality certifications: ISO9001, ISO13485, ISO14001, ISO18001, FSC, European CE, FDA of the USA, Russian Federal Register, Uzbekistan Register, Indonesia Register etc. Products are tested by the 93/42/EEC and IEC 60601 safety standards. 
INTERNATIONAL
EXPO
CMEF German Medica Africa Health FIME China Germany South Africa USA Pharmedi TIHE North Africa Health Hospital Expo Vietnam Uzbekistan Egypt Indonesia Arab Health Medic West Africa ExpoMed Medic East Africa United Arab Emirates Nigeria Mexico Kenya 
OUR PRODUCTS WERE EXPORTED TO
206 COUNTRIES AND PLACES
-
Warranty
Q: What warranty, installation and training do your products have?
A: If you are hospital or clinic, we will dispatch engineer to your hospital, and we provide you installation and technical training.
If you are distributor, you can dispatch engineer to visit our factory to get the technical training, or we will dispatch engineer to your company to provide you technical training.
A: * We provide a standard 1 year warranty, optional to be increased.
* 1% free parts of the total quantity will be provided together with goods.
* The product that is damaged or fails due to the manufacturing problem within 1 year after the purchasing date will gain free spare parts and assembling drawings from the company.
* Beyond the maintenance period, we will charge the accessories, but the technical service is still free.
FAQ
Q: What quality requirements does your company meet?
A: We have ISO-9001/13485/14001/18001/45001, MDR CE, North American FDA, Russian Federal Registration, Uzbekistan Registration, Indonesia Registration, TUV test report and so on. Our certificate is over 30 types. Products also meet the 93/42/EEC and IEC60601 safety standards. In addition to having 278 patents registered, we are constantly developing and implementing new standards for product quality and service efficiency.
Q: Do you supply one stop solutions for hospitals or clinics?
A: Yes, we have a professional design team to make a design solutions, and we give you the product matching plan. You just provide us with your hospital's design drawing and requirements.
Q: What is your delivery time?
A: Our standard delivery time is 3~5 days. If the bulk quantity order, the delivery time is 25 days.
Q: What payment options do you offer?
A: We are flexible in terms of payment. We can do LC, TT, even DP, credit card, Paypal etc., after auditing the customer.
Payment Term Payment Term TT EXW 30% T/T in advance, paid the balance before shipment FOB/FCA CNF CIF DDU/DAP L/C L/C amount above USD 10,000, we can accept L/C at sight
Western Union Amount lower than 5,000usd Delivery Time 3~5 days after receiving the payment Q: Is OEM & ODM available in your factory?
A: Yes, we have a professional R&D team to carry out customized projects. You just need to provide us with your own technical datas.
Q: Can I see your products personally?
A: You are welcome to our 5,000㎡ of showrooms in our factory in China(3 hours by high speed train from Shanghai).
In addition, we annually attend numerous international exhibitions where we present our products, such as FIME(USA), Arab Health(United Arab Emirates), North Africa Health(Egypt),
CMEF(Shenzhen/Shanghai), German Medica(Germany), Medic West Africa(Nigeria), ExpoMed(Mexico), Pharmedi(Vietnam), Hospital Expo(Indonesia) etc.
Next page
Last page
Hydraulic Operation Table
Next page
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible
GET IN TOUCH WITH US