MT MEDICAL DST-1A Economical Electric Operating Table - 250kg Load & C-arm Compatible & Multi-surgery Use
Key words：
Category：
Products
Operation Table
Electric Surgical Bed
DOWN LOAD BROCHURE：
- Parameters
- Features
- Quality
- Warranty
-
- Commodity name: MT MEDICAL DST-1A Economical Electric Operating Table - 250kg Load & C-arm Compatible & Multi-surgery Use
- 产品编号: DST-1A
►1.PRODUCT DESCRIPTION
DST-1A Electric Comprehensive Operating Table
A practical and economical operating table designed for multi‑purpose surgical positioning across a wide range of procedures.
Longitudinal Sliding for C‑arm Space
The tabletop supports longitudinal translation to create accurate clearance for C‑arm imaging and keep positioning precise during exams.
Multi‑position Surgical Postures
Independent adjustments for height, back/leg sections and table tilting help achieve common surgical positions without interfering with each other.
Complete Accessory Configuration
Standard accessories—leg, waist and shoulder holders, anesthesia shelf and arm supports—support fast setup for different departments.
Built‑in Waist Bridge Lift
Manual waist bridge lifting helps elevate the lumbar region for better exposure when required.
Adjustable & Removable Head Plate
Head section angle adjustment and quick mounting/removal support flexible patient positioning and accessory installation.
Manual Leg Plate Adjustment & Split Design
Manual leg plate adjustment with split leg sections supports common positioning needs such as lithotomy setup.
Manual Braking for Secure Fixation
Manual braking helps stabilize the table quickly and keep it firmly fixed during operation and patient transfer.
►2.TECHNICAL PARAMETER
Model DST-1A Economical Overall size 2040±10 mm × 570±5 mm Table height (without mattress) Min 660±10 mm; Max 910±20 mm Head plate Up 45°±2; Down 95°±2; Removable Back plate Up to 70°±2; Down to 20°±2 Table tilt Forward 20°±2; Backward 20°±2 Lateral tilt Left 20°±2; Right 20°±2 Waist bridge stroke 120 mm Leg plate (split) Fold 90°±2 (each side) Power supply 220V±22V, 50Hz±1Hz Rated power 400 W Standby power 10 W Work restriction 10% duty cycle (2 min ON / 20 min OFF) Safe bearing 200 kg ►3.STANDARD CONFIGURATION
- Leg holders × 1 pair
- Waist holders × 1 pair
- Shoulder holders × 1 pair
- Anesthesia shelf × 1 pc
- Arm supports × 1 pair
- Foot braking × 1 set
- Controller × 1 set
►4.OPTIONAL CONFIGURATION, ACCESSORIES AND SERVICE
- Additional accessory sets available on request (positioning supports and clamps).
- Alternative tabletop/mattress options for specific procedures available on request.
- Spare parts kit and maintenance support available on request.
►5.ADVANTAGE
Multi‑purpose positioning in one table:
DST‑1A is designed for multi‑purpose surgery. Independent adjustments of head, back and leg sections help build common postures for different specialties.
Sectional design and accessory supports allow fast setup while keeping the tabletop stable for routine clinical workflows.
C‑arm examination readiness:
The tabletop panel uses a high‑strength X‑ray plate and can be used with a C‑arm for X‑ray examination without repeated patient transfers.
Longitudinal translation provides more operating space for C‑arm positioning and helps keep imaging alignment accurate.
24V DC microprocessor control:
Hand‑held microprocessor control with 24V DC low‑voltage operation supports simple, safe and reliable adjustment during procedures.
Key movements are driven by electric push rods for smooth operation and repeatable positioning.
Stainless‑steel frame & 304 side rails:
The table frame is made of high‑quality stainless steel, and the side rails are stainless steel 304—built for durability and frequent disinfection.
Standard accessories (leg/waist/shoulder holders, anesthesia shelf, arm supports) support multi‑department use.
Comfortable mattress & easy cleaning:
High‑density sponge mattress with PU leather surface provides comfort while remaining waterproof, easy to clean and anti‑static.
Designed for daily turnover and routine surface wipe‑down between cases.
After‑sales support:
We provide product documentation, remote technical support and spare‑parts supply for maintenance needs.
Warranty and service terms can be provided according to your project requirements.
-
Built-in Manual Lumbar Bridge
Built-in manual lumbar bridge (up to 120 mm lift) supports abdominal and urology positioning, improving surgical access when needed.
Multi-axis Patient Positioning
Electric actuators enable height, tilt and 300 mm longitudinal sliding, helping teams fine-tune complex positions across different specialties.
Waterproof, Hygienic Upholstery
Medical-grade waterproof leather with seamless design resists mildew, bacteria and alcohol-based disinfectants—easy to wipe and maintain OR hygiene.
Emergency Backup Power Mode
Emergency power mode helps keep essential table movements available during unexpected outages, supporting continuity in critical moments.
-
WHY CHOOSE
MT MEDICAL
+500 employees
+100000 m² of production facilities
29 product categories
698 series products
+1000 organizations
in +206 countries attended
OUR GLOBAL
PARTNERS
PROFESSIONAL
TEAMS
Design Research Manufacturing Maintenance Service 
RELIABLE
PACKING
OUR
CERTIFICATES
We focus on constant innovation. We work on the continuous development and implementation of new standards for product quality and the efficiency of our service. As a result, we accumulate more than 2,000 registered technological patents and our products were approved by quality certifications: ISO9001, ISO13485, ISO14001, ISO18001, FSC, European CE, FDA of the USA, Russian Federal Register, Uzbekistan Register, Indonesia Register etc. Products are tested by the 93/42/EEC and IEC 60601 safety standards. 
INTERNATIONAL
EXPO
CMEF German Medica Africa Health FIME China Germany South Africa USA Pharmedi TIHE North Africa Health Hospital Expo Vietnam Uzbekistan Egypt Indonesia Arab Health Medic West Africa ExpoMed Medic East Africa United Arab Emirates Nigeria Mexico Kenya 
OUR PRODUCTS WERE EXPORTED TO
206 COUNTRIES AND PLACES
-
Warranty
Q: What warranty, installation and training do your products have?
A: If you are hospital or clinic, we will dispatch engineer to your hospital, and we provide you installation and technical training.
If you are distributor, you can dispatch engineer to visit our factory to get the technical training, or we will dispatch engineer to your company to provide you technical training.
A: * We provide a standard 1 year warranty, optional to be increased.
* 1% free parts of the total quantity will be provided together with goods.
* The product that is damaged or fails due to the manufacturing problem within 1 year after the purchasing date will gain free spare parts and assembling drawings from the company.
* Beyond the maintenance period, we will charge the accessories, but the technical service is still free.
FAQ
Q: What quality requirements does your company meet?
A: We have ISO-9001/13485/14001/18001/45001, MDR CE, North American FDA, Russian Federal Registration, Uzbekistan Registration, Indonesia Registration, TUV test report and so on. Our certificate is over 30 types. Products also meet the 93/42/EEC and IEC60601 safety standards. In addition to having 278 patents registered, we are constantly developing and implementing new standards for product quality and service efficiency.
Q: Do you supply one stop solutions for hospitals or clinics?
A: Yes, we have a professional design team to make a design solutions, and we give you the product matching plan. You just provide us with your hospital's design drawing and requirements.
Q: What is your delivery time?
A: Our standard delivery time is 3~5 days. If the bulk quantity order, the delivery time is 25 days.
Q: What payment options do you offer?
A: We are flexible in terms of payment. We can do LC, TT, even DP, credit card, Paypal etc., after auditing the customer.
Payment Term Payment Term TT EXW 30% T/T in advance, paid the balance before shipment FOB/FCA CNF CIF DDU/DAP L/C L/C amount above USD 10,000, we can accept L/C at sight
Western Union Amount lower than 5,000usd Delivery Time 3~5 days after receiving the payment Q: Is OEM & ODM available in your factory?
A: Yes, we have a professional R&D team to carry out customized projects. You just need to provide us with your own technical datas.
Q: Can I see your products personally?
A: You are welcome to our 5,000㎡ of showrooms in our factory in China(3 hours by high speed train from Shanghai).
In addition, we annually attend numerous international exhibitions where we present our products, such as FIME(USA), Arab Health(United Arab Emirates), North Africa Health(Egypt),
CMEF(Shenzhen/Shanghai), German Medica(Germany), Medic West Africa(Nigeria), ExpoMed(Mexico), Pharmedi(Vietnam), Hospital Expo(Indonesia) etc.
Last page
MT MEDICAL DST800B Operating Table - 720-1070mm Height Adjustment & 300mm Sliding
RELATED PRODUCTS
ONLINE MESSAGE
* Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible
GET IN TOUCH WITH US