Dual Controller Electric Hydraulic Operating Table - V/Reverse V Function & One-Key Reset

Home page

Dual Controller Electric Hydraulic Operating Table - V/Reverse V Function & One-Key Reset

Category:

Products

Operation Table

Electric Hydraulic Surgical Bed

Parameters

►1.PRODUCT DESCRIPTION

Key specifications overview

Table panel length 2015±10mm; width 540±10mm; carbon fiber thickness 28mm. X-ray attenuation coefficient (option) <0.76mmAL.

Carbon fiber bed panel for imaging

Wide and thicker carbon fiber bedboard provides space for C-arm and supports imaging observation and diagnosis.

Electric sliding function for C-arm space

Horizontal movement supports C-arm space; the brochure sliding illustration shows routing 330mm±20mm.

Multi-position display& posture control

Vertical/horizontal movement, head/foot tilt, left/right tilt and adjustable back plate are controlled by separate systems; functions work independently without affecting each other.

Imported precision linear guide rail

Imported precision linear guide rail supports smooth running during sliding operation bed.

Double controller system

Remote controller and bed body standby operation control panel provide two independent operating systems, supporting operation continuity if one controller fails.

Luxury lockers & accessory storage

Using high quality lockers supports accessory storage and convenient daily operation workflow.

CPR one-key reset + V & A function

Supports CPR function (a key reset). V & A function is electric for posture setting during procedures.

►2.TECHNICAL PARAMETER

Model	DST-III Electric Hydraulic Imaging Operating Table
Back board material	Carbon fiber
Table panel whole length	2015 ± 10mm
Whole width	540mm ± 10mm
Carbon fiber thickness	28mm
Table panel X-ray attenuation coefficient(Option)	<0.76mmAL
Move route	350mm ± 20mm (ELECTRIC)
Min.bed height from the ground	650mm ± 20mm
Max.bed height from the ground	1000mm ± 20mm
Lifting route	350mm ± 20mm (ELECTRIC)
Leg/Head tilt angle	Leg Tilt: 25°±2° (ELECTRIC) / Head Tilt: 25°±2° (ELECTRIC)
Tilt angle	Left Tilt: 22°±2° (ELECTRIC) / Right Tilt: 22°±2° (ELECTRIC)
Back section raise & lower angle	Raised: 70°±2° (ELECTRIC) / Lower: 32°±2° (ELECTRIC)
Leg board raise & lower angle	Raised: 28°±2° (MANUAL) / Lower: 90°±5° (MANUAL)
Head section angle	Raised: 30°±2° (MANUAL) / Lower: 90°±5° (MANUAL)
Single-phase alternating current	220V AC 50/60HZ
Input maximum power	300VA
Net weight	260kg
CPR function (A key reset)	Yes
V & A function	Yes electric

►3.STANDARD CONFIGURATION

Memory foam mattress × 1 pcs.
Leg holders × 1 pair.
Waist holders × 1 pair.
Shoulder holders × 1 pair.
Lateral support × 1 pair.

►4.OPTIONAL CONFIGURATION, ACCESSORIES AND SERVICE

Head frame / U-type head rest (optional).
Headrest support and restraint strap (optional).
Traction support for posterior cervical surgery (optional).
Semi-circular postural cushion / surgical bed combination mattress (optional).

►5.ADVANTAGE

Imaging-oriented carbon fiber bed panel:

Carbon fiber bedboard supports imaging workflow and provides more operating space for C-arm observation and diagnosis.

Electric horizontal movement supports C-arm space. The parameters list move route 350mm±20mm (electric); the sliding illustration shows routing 330mm±20mm.

Long sliding function for C-arm space:

Vertical/horizontal movement, head/foot tilt, left/right tilt and adjustable back plate are controlled by separate systems and work independently.

Imported precision linear guide rail supports smooth running; luxury lockers and dual controllers support daily workflow and operation continuity.

Independent control systems & multi-position display:

1. Remote Technical Support: Online guidance for installation, commissioning and operation when needed.

2. Troubleshooting Assistance: Support for operation issues and parameter setting via remote communication.

Double controller + smooth running guide rail:

3. Spare Parts & Service: Spare parts support can be provided; on-site service can be arranged upon request (chargeable).

LED bulbs with a life expectancy of up to 50,000 hours and constant illumination control (adjustable in steps) provide reliable, low-maintenance lighting for the OR.

Technical Support Services:

The electronic control program emits steady and consistent light, while the control panel with microprocessor allows easy adjustment of intensity and color temperature.

Ceiling-mounted or portable stand installations and HD camera compatibility meet different operating room layouts and enable image documentation when needed.

Technical Support Services:

1. Software Program Support: In case of software-related issues, you can enjoy 24/7 free online after-sales service. Our professional team is on standby around the clock to quickly troubleshoot and resolve problems.

2. Software Upgrade Assistance: For software upgrade requirements, we offer remote support services. Upgrades can be completed without on-site visits, saving your time and effort.

3. Hardware Fault Resolution: If a product hardware fault occurs, we will immediately arrange for local technical personnel to provide troubleshooting services for efficient resolution (Note: This service is chargeable).

Pictures

350mm±10mm sliding function for C-arm space

Horizontal movement 350mm±10mm supplies accurate and convenient space for C-arm applications, helping workflow in imaging-related procedures.

Microcomputer control + 304 stainless steel structure

Microcomputer control supports one-key reset and postural memory. Base, lifting column shell, bed and side rail use high quality 304 stainless steel for corrosion resistance and easy cleaning.

Quality

► WHY CHOOSE MT MEDICAL

500 + employees

100000 + m² of production facilities

29 product categories

698 series products

1000 + organizations

206 + countries attended

29 product categories

698 series products

EXTENSIVE EXPERIENCE

Two decades focused on design, production and service, with 34 processes of quality control.

FACTORY DIRECT

Own factory, with direct shipment and direct price.

GLOBAL SERVICE

Over 1,000 medical and health care organizations attended in more than 206 countries.

VARIOUS PRODUCTS

29 product categories and 698 series products.

CERTIFIED QUALITY

Over 20 quality certifications and safety standards.

PROFESSIONAL TEAM

Over 500 employees worldwide; more than 50 qualified engineers and more than 100 trained technicians.

OEM SERVICE

Qualified R&D team to do customized projects.

MODERN FACILITIES

Over 100,000 m² production area, equipped with 189 sets of automatic production facilities.

STRATEGIC LOCATION

3 hours by high speed train from Shanghai.

► FULLY AUTOMATED PRODUCTION EQUIPMENTS

ISO 9001, 13485, 14001, 18001 Management System

Fully Automated Welding Line

Fully Automatic Laser Cutting

Machining Center

Miling Machine

Automated Spray Molding Workshop

Punching Machine

Automated Pickling And Phosphating Workshop

Automated ABS Injection Molding And GMP Workshop

► OUR GLOBAL PARTNERS

► PROFESSIONAL TEAMS

Design

Research

Manufacturing

Maintenance

Service

► RELIABLE PACKING

Shipping Site

► OUR CERTIFICATES

We focus on constant innovation. We work on the continuous development and implementation of new standards for product quality and the efficiency of our service. As a result, we accumulate more than 2,000 registered technological patents and our products were approved by quality certifications: ISO9001, ISO13485, ISO14001, ISO18001, FSC, European CE, FDA of the USA, Russian Federal Register, Uzbekistan Register, Indonesia Register etc. Products are tested by the 93/42/EEC and IEC 60601 safety standards.

► INTERNATIONAL EXPO

CMEF	German Medica	Africa Health	FIME
China	Germany	South Africa	USA
Pharmedi	TIHE	North Africa Health	Hospital Expo
Vietnam	Uzbekistan	Egypt	Indonesia
Arab Health	Medic West Africa	ExpoMed	Medic East Africa
United Arab Emirates	Nigeria	Mexico	Kenya

► OUR PRODUCTS WERE EXPORTED TO 206 COUNTRIES AND PLACES

FAQ

What warranty, installation and training do your products have?

If you are hospital or clinic, we will dispatch engineer to your hospital, and we provide you installation and technical training. If you are distributor, you can dispatch engineer to visit our factory to get the technical training, or we will dispatch engineer to your company to provide you technical training. * We provide a standard 1 year warranty, optional to be increased. * 1% free parts of the total quantity will be provided together with goods. * The product that is damaged or fails due to the manufacturing problem within 1 year after the purchasing date will gain free spare parts and assembling drawings from the company. * Beyond the maintenance period, we will charge the accessories, but the technical service is still free.

What quality requirements does your company meet?

We have ISO-9001/13485/14001/18001/45001, MDR CE, North American FDA, Russian Federal Registration, Uzbekistan Registration, Indonesia Registration, TUV test report and so on. Our certificate is over 30 types. Products also meet the 93/42/EEC and IEC60601 safety standards. In addition to having 278 patents registered, we are constantly developing and implementing new standards for product quality and service efficiency.

Do you supply one stop solutions for hospitals or clinics?

Yes, we have a professional design team to make a design solutions, and we give you the product matching plan. You just provide us with your hospital's design drawing and requirements.

What is your delivery time?

Our standard delivery time is 3~5 days. If the bulk quantity order, the delivery time is 25 days.

What payment options do you offer?

We are flexible in terms of payment. We can do LC, TT, even DP, credit card, Paypal etc., after auditing the customer.

Is OEM & ODM available in your factory?

Yes, we have a professional R&D team to carry out customized projects. You just need to provide us with your own technical datas.

Can I see your products personally?

You are welcome to our 5,000㎡ of showrooms in our factory in China(3 hours by high speed train from Shanghai). In addition, we annually attend numerous international exhibitions where we present our products, such as FIME(USA), Arab Health(United Arab Emirates), North Africa Health(Egypt), CMEF(Shenzhen/Shanghai), German Medica(Germany), Medic West Africa(Nigeria), ExpoMed(Mexico), Pharmedi(Vietnam), Hospital Expo(Indonesia) etc.

Download Brochure

Operation Room Equipments Catalogue

Phone

E-mail

Address

Zhaosheng Science Park, 2562 Lianhua Road, Economic Development Zone, Hefei, Anhui

Hospital Procurement Applications

Z7Z ICU Smart Bed for Critical Care Projects and Tenders

The Z7Z ICU Smart Bed is designed for critical care projects requiring advanced electric positioning, lateral tilt, integrated weighing, rapid CPR adjustment and efficient nursing controls. It can be configured for new ICU construction, critical care renovation, public hospital tenders, private hospital expansion and multi-bed procurement programs.

NEW ICU PROJECT

New ICU Ward Construction

Configure the Z7Z for newly built intensive care units requiring adjustable bed height, Trendelenburg positions, lateral tilt, integrated weighing and accessible nursing controls.

ICU RENOVATION

ICU Renovation and Bed Replacement

Replace aging critical care beds while coordinating room dimensions, electrical requirements, bed functions, mattress selection, accessories and phased installation schedules.

PUBLIC TENDER

Government and Public Hospital Tenders

Support ICU bed tenders with configuration review, technical specifications, compliance documents, packing details, accessory lists and coordinated project quotations.

SMART ICU

Smart ICU Workflow Upgrades

Introduce integrated weighing, one-touch positioning, electric CPR, manual CPR and nurse control functions to support efficient patient positioning and critical care workflows.

PATIENT CARE

Advanced Positioning and Pressure Management

Apply the 30-degree positioning reference and 75+15 mm dual auto-regression design in projects focused on patient positioning, comfort and pressure management.

MULTI-BED PROJECT

Distributor and Multi-Bed Procurement

Coordinate bed quantities, control configurations, motor options, mattresses, accessories, spare parts and delivery batches for distributor-led or multi-site ICU projects.

Project Information Checklist

Z7Z ICU Smart Bed for Critical Care Projects and Tenders

Quantity and Care Setting

Required quantity, nursing home, rehabilitation center, assisted-living facility or chronic care unit

Patient and Caregiver Needs

Patient mobility, transfer requirements, positioning needs and caregiver working-height preferences

Configuration and Accessories

Mattress width, platform material, wood finish, trapeze pole, emergency power and accessory requirements

Destination and Schedule

Delivery country, room-access conditions, project timeline and expected delivery schedule

C8C ICU BED PROJECT SUPPORT

Smart ICU Workflow Upgrades

Share your required bed quantity, electric functions, weighing and warning requirements, mattress and accessory needs, voltage standard, delivery destination and project schedule. Our team will help coordinate a suitable C8c ICU bed proposal and procurement documentation.

Download Brochure

Phone

E-mail

Address

Zhaosheng Science Park, 2562 Lianhua Road, Economic Development Zone, Hefei, Anhui

Hospital Procurement Applications

Z7Z ICU Smart Bed for Critical Care Projects and Tenders

NEW ICU PROJECT

New ICU Ward Construction

Configure the Z7Z for newly built intensive care units requiring adjustable bed height, Trendelenburg positions, lateral tilt, integrated weighing and accessible nursing controls.

ICU RENOVATION

ICU Renovation and Bed Replacement

Replace aging critical care beds while coordinating room dimensions, electrical requirements, bed functions, mattress selection, accessories and phased installation schedules.

PUBLIC TENDER

Government and Public Hospital Tenders

Support ICU bed tenders with configuration review, technical specifications, compliance documents, packing details, accessory lists and coordinated project quotations.

SMART ICU

Smart ICU Workflow Upgrades

Introduce integrated weighing, one-touch positioning, electric CPR, manual CPR and nurse control functions to support efficient patient positioning and critical care workflows.

PATIENT CARE

Advanced Positioning and Pressure Management

Apply the 30-degree positioning reference and 75+15 mm dual auto-regression design in projects focused on patient positioning, comfort and pressure management.

MULTI-BED PROJECT

Distributor and Multi-Bed Procurement

Coordinate bed quantities, control configurations, motor options, mattresses, accessories, spare parts and delivery batches for distributor-led or multi-site ICU projects.

Project Information Checklist

Z7Z ICU Smart Bed for Critical Care Projects and Tenders

Quantity and Care Setting

Required quantity, nursing home, rehabilitation center, assisted-living facility or chronic care unit

Patient and Caregiver Needs

Patient mobility, transfer requirements, positioning needs and caregiver working-height preferences

Configuration and Accessories

Mattress width, platform material, wood finish, trapeze pole, emergency power and accessory requirements

Destination and Schedule

Delivery country, room-access conditions, project timeline and expected delivery schedule

C8C ICU BED PROJECT SUPPORT

Smart ICU Workflow Upgrades