3008A Multi-Purpose Operating Table Hydraulic Lift Surgical Bed

Home page

3008A Multi-Purpose Operating Table Hydraulic Lift Surgical Bed

Category:

Hydraulic Surgical Bed

Parameters

►1.PRODUCT DESCRIPTION

Multi-disciplinary application

Suitable for chest surgery, otorhinolaryngology, gynaecology and obstetrics, urology and orthopaedic procedures, helping meet broad operating room requirements.

Flexible leg section design

The leg plate can be detached, abducted and folded, helping improve access for urology procedures, and rotating buttons at the accessory section allow easier disassembly.

Stainless steel base shell

The base is internally made of stainless steel, and the outer shell is made of 201 stainless steel for corrosion resistance, oxidation resistance and easier cleaning.

Convenient height adjustment

The height is adjusted by the base long pole, while the table adopts a single-device operating design with foot brake support for convenient daily control.

►2.TECHNICAL PARAMETER

Model	3008A
Table length and width	2100 mm × 480 mm
Highest and lowest height	1045 mm / 800 mm
Forward tilt	≥55°
Lateral tilt	Left ≥25°
Back panel fold up	≥85°
Raised lumbar	120 mm
Feet fold down	≥90°
Oil pump stroke	240 mm
Dynamic load capacity	200 kg

►3.STANDARD CONFIGURATION

Anesthesia screen: 1 piece.
Shoulder support: 2 pieces.
Armrest: 2 pieces.
Support frame: 1 piece.
Mattress: 1 piece.
Foot board: 1 piece.
Leg rest: 2 pieces.
Slider: 7 pieces.

►4.OPTIONAL CONFIGURATION, ACCESSORIES AND SERVICE

Optional battery.
Emergency power mode can be selected to handle sudden power failure situations.
Please consult for accessory configuration according to different procedure requirements.

►5.ADVANTAGE

Manual hydraulic operation:

The brochure describes an all-mechanical operating table with hydraulic lifting, helping provide stable elevation in daily use.

This structure is practical for routine general surgery where straightforward operation and convenient maintenance are preferred.

Gas spring assisted adjustment:

The back plate and leg plate are controlled by gas spring, allowing smoother angle adjustment during patient positioning.

This helps staff complete setup more conveniently for different general surgery requirements.

Reliable mechanical motion control:

Worm gear drive is used to control key table movements, helping provide dependable manual mechanical operation.

Trendelenburg, reverse Trendelenburg and lateral tilt all provide practical positioning ranges for routine procedures.

Ergonomic T-shaped base:

The T-shaped base follows ergonomic principles and leaves enough free space for doctors around the operating table.

This improves accessibility around the table and makes the product suitable for general surgery environments.

Positioning flexibility for general surgery:

Head plate, back plate, leg plate and kidney bridge movements help the table adapt to different positioning requirements.

The parameter range shown in the brochure supports routine general surgery applications with practical positioning flexibility.

Technical Support Services:

1. Online Consultation Support: We provide online consultation for product use, operating questions and routine troubleshooting.

2. Installation Guidance: Remote guidance is available for setup and basic operation training.

3. Spare Parts and Maintenance Support: Spare parts supply and follow-up service can be arranged according to actual needs.

Pictures

Waterproof, Hygienic Upholstery

Medical-grade waterproof leather with seamless design resists mildew, bacteria and alcohol-based disinfectants—easy to wipe and maintain OR hygiene.

Quality

► WHY CHOOSE MT MEDICAL

500 + employees

100000 + m² of production facilities

29 product categories

698 series products

1000 + organizations

206 + countries attended

29 product categories

698 series products

EXTENSIVE EXPERIENCE

Two decades focused on design, production and service, with 34 processes of quality control.

FACTORY DIRECT

Own factory, with direct shipment and direct price.

GLOBAL SERVICE

Over 1,000 medical and health care organizations attended in more than 206 countries.

VARIOUS PRODUCTS

29 product categories and 698 series products.

CERTIFIED QUALITY

Over 20 quality certifications and safety standards.

PROFESSIONAL TEAM

Over 500 employees worldwide; more than 50 qualified engineers and more than 100 trained technicians.

OEM SERVICE

Qualified R&D team to do customized projects.

MODERN FACILITIES

Over 100,000 m² production area, equipped with 189 sets of automatic production facilities.

STRATEGIC LOCATION

3 hours by high speed train from Shanghai.

► FULLY AUTOMATED PRODUCTION EQUIPMENTS

ISO 9001, 13485, 14001, 18001 Management System

Fully Automated Welding Line

Fully Automatic Laser Cutting

Machining Center

Miling Machine

Automated Spray Molding Workshop

Punching Machine

Automated Pickling And Phosphating Workshop

Automated ABS Injection Molding And GMP Workshop

► OUR GLOBAL PARTNERS

► PROFESSIONAL TEAMS

Design

Research

Manufacturing

Maintenance

Service

► RELIABLE PACKING

Shipping Site

► OUR CERTIFICATES

We focus on constant innovation. We work on the continuous development and implementation of new standards for product quality and the efficiency of our service. As a result, we accumulate more than 2,000 registered technological patents and our products were approved by quality certifications: ISO9001, ISO13485, ISO14001, ISO18001, FSC, European CE, FDA of the USA, Russian Federal Register, Uzbekistan Register, Indonesia Register etc. Products are tested by the 93/42/EEC and IEC 60601 safety standards.

► INTERNATIONAL EXPO

CMEF	German Medica	Africa Health	FIME
China	Germany	South Africa	USA
Pharmedi	TIHE	North Africa Health	Hospital Expo
Vietnam	Uzbekistan	Egypt	Indonesia
Arab Health	Medic West Africa	ExpoMed	Medic East Africa
United Arab Emirates	Nigeria	Mexico	Kenya

► OUR PRODUCTS WERE EXPORTED TO 206 COUNTRIES AND PLACES

FAQ

What warranty, installation and training do your products have?

If you are hospital or clinic, we will dispatch engineer to your hospital, and we provide you installation and technical training. If you are distributor, you can dispatch engineer to visit our factory to get the technical training, or we will dispatch engineer to your company to provide you technical training. * We provide a standard 1 year warranty, optional to be increased. * 1% free parts of the total quantity will be provided together with goods. * The product that is damaged or fails due to the manufacturing problem within 1 year after the purchasing date will gain free spare parts and assembling drawings from the company. * Beyond the maintenance period, we will charge the accessories, but the technical service is still free.

What quality requirements does your company meet?

We have ISO-9001/13485/14001/18001/45001, MDR CE, North American FDA, Russian Federal Registration, Uzbekistan Registration, Indonesia Registration, TUV test report and so on. Our certificate is over 30 types. Products also meet the 93/42/EEC and IEC60601 safety standards. In addition to having 278 patents registered, we are constantly developing and implementing new standards for product quality and service efficiency.

Do you supply one stop solutions for hospitals or clinics?

Yes, we have a professional design team to make a design solutions, and we give you the product matching plan. You just provide us with your hospital's design drawing and requirements.

What is your delivery time?

Our standard delivery time is 3~5 days. If the bulk quantity order, the delivery time is 25 days.

What payment options do you offer?

We are flexible in terms of payment. We can do LC, TT, even DP, credit card, Paypal etc., after auditing the customer.

Is OEM & ODM available in your factory?

Yes, we have a professional R&D team to carry out customized projects. You just need to provide us with your own technical datas.

Can I see your products personally?

You are welcome to our 5,000㎡ of showrooms in our factory in China(3 hours by high speed train from Shanghai). In addition, we annually attend numerous international exhibitions where we present our products, such as FIME(USA), Arab Health(United Arab Emirates), North Africa Health(Egypt), CMEF(Shenzhen/Shanghai), German Medica(Germany), Medic West Africa(Nigeria), ExpoMed(Mexico), Pharmedi(Vietnam), Hospital Expo(Indonesia) etc.

Download Brochure

Operation Room Equipments Catalogue

Phone

E-mail

Address

Zhaosheng Science Park, 2562 Lianhua Road, Economic Development Zone, Hefei, Anhui

Hospital Procurement Applications

Z7Z ICU Smart Bed for Critical Care Projects and Tenders

The Z7Z ICU Smart Bed is designed for critical care projects requiring advanced electric positioning, lateral tilt, integrated weighing, rapid CPR adjustment and efficient nursing controls. It can be configured for new ICU construction, critical care renovation, public hospital tenders, private hospital expansion and multi-bed procurement programs.

NEW ICU PROJECT

New ICU Ward Construction

Configure the Z7Z for newly built intensive care units requiring adjustable bed height, Trendelenburg positions, lateral tilt, integrated weighing and accessible nursing controls.

ICU RENOVATION

ICU Renovation and Bed Replacement

Replace aging critical care beds while coordinating room dimensions, electrical requirements, bed functions, mattress selection, accessories and phased installation schedules.

PUBLIC TENDER

Government and Public Hospital Tenders

Support ICU bed tenders with configuration review, technical specifications, compliance documents, packing details, accessory lists and coordinated project quotations.

SMART ICU

Smart ICU Workflow Upgrades

Introduce integrated weighing, one-touch positioning, electric CPR, manual CPR and nurse control functions to support efficient patient positioning and critical care workflows.

PATIENT CARE

Advanced Positioning and Pressure Management

Apply the 30-degree positioning reference and 75+15 mm dual auto-regression design in projects focused on patient positioning, comfort and pressure management.

MULTI-BED PROJECT

Distributor and Multi-Bed Procurement

Coordinate bed quantities, control configurations, motor options, mattresses, accessories, spare parts and delivery batches for distributor-led or multi-site ICU projects.

Project Information Checklist

Z7Z ICU Smart Bed for Critical Care Projects and Tenders

Quantity and Care Setting

Required quantity, nursing home, rehabilitation center, assisted-living facility or chronic care unit

Patient and Caregiver Needs

Patient mobility, transfer requirements, positioning needs and caregiver working-height preferences

Configuration and Accessories

Mattress width, platform material, wood finish, trapeze pole, emergency power and accessory requirements

Destination and Schedule

Delivery country, room-access conditions, project timeline and expected delivery schedule

C8C ICU BED PROJECT SUPPORT

Smart ICU Workflow Upgrades

Share your required bed quantity, electric functions, weighing and warning requirements, mattress and accessory needs, voltage standard, delivery destination and project schedule. Our team will help coordinate a suitable C8c ICU bed proposal and procurement documentation.

Discuss Your Project

Download Brochure

Operation Room Equipments Catalogue

Phone

E-mail

Address

Zhaosheng Science Park, 2562 Lianhua Road, Economic Development Zone, Hefei, Anhui

Hospital Procurement Applications

Z7Z ICU Smart Bed for Critical Care Projects and Tenders

NEW ICU PROJECT

New ICU Ward Construction

Configure the Z7Z for newly built intensive care units requiring adjustable bed height, Trendelenburg positions, lateral tilt, integrated weighing and accessible nursing controls.

ICU RENOVATION

ICU Renovation and Bed Replacement

Replace aging critical care beds while coordinating room dimensions, electrical requirements, bed functions, mattress selection, accessories and phased installation schedules.

PUBLIC TENDER

Government and Public Hospital Tenders

Support ICU bed tenders with configuration review, technical specifications, compliance documents, packing details, accessory lists and coordinated project quotations.

SMART ICU

Smart ICU Workflow Upgrades

Introduce integrated weighing, one-touch positioning, electric CPR, manual CPR and nurse control functions to support efficient patient positioning and critical care workflows.

PATIENT CARE

Advanced Positioning and Pressure Management

Apply the 30-degree positioning reference and 75+15 mm dual auto-regression design in projects focused on patient positioning, comfort and pressure management.

MULTI-BED PROJECT

Distributor and Multi-Bed Procurement

Coordinate bed quantities, control configurations, motor options, mattresses, accessories, spare parts and delivery batches for distributor-led or multi-site ICU projects.

Project Information Checklist

Z7Z ICU Smart Bed for Critical Care Projects and Tenders

Quantity and Care Setting

Required quantity, nursing home, rehabilitation center, assisted-living facility or chronic care unit

Patient and Caregiver Needs

Patient mobility, transfer requirements, positioning needs and caregiver working-height preferences

Configuration and Accessories

Mattress width, platform material, wood finish, trapeze pole, emergency power and accessory requirements

Destination and Schedule

Delivery country, room-access conditions, project timeline and expected delivery schedule

C8C ICU BED PROJECT SUPPORT

Smart ICU Workflow Upgrades